Questions & Answers for: how to fit forks

forks fit 996 Just out of curiosity will the 1098 Showa forks fit a 996 have done a search but haven't found much. I know they will fit in the standard 996 triple clamps but will my standard 996 wheel

fit forks from a different bikes hi i have a suzuki 125 gz it needs new forks,can i fit forks from other bike,as i can not find any cheap enough michael, Yes, forks can be swapped in some cases. First

...fit to the fork at the same time, as the fork is about 1/8 of an inch too narrow. The fork is not flexible at all, so you can muscle it open to force it over the wheel posts. Any suggestions?? One ...

...forks fit?? Any forks with the same diameter will fit in the clamps but you must consider the length of the forks, fork travel length, speedometer hook up, brake assembly mounting and wheel mounting. ...

...interface with the ''fork'' from the starter motor? Does it just push up against it, or does it fit into the fork? If it fits into the ''fork'' how do I get it there??? It hooks onto the fork. ...

...FORKS FIT IN THE 1996, STOCK NUMBERS ARE DIFFERENT Measure the diameter of the forks and the position of the yokes(clamps that hold the forks)Also fork length.If they are are the same,bolt them ...

...fork forks need to be removed,and disasemble,and cleaned,new fork seals,reasembleb fit new seals, refit damping cartridge,fill fork with 5w fork oil upto 120mm from top,refit spring, refit fork ...

and the assembly instructions are terrible. How do you affix the front wheel? The front wheel axle fits into the fork, there is a U shaped notch in each fork leg at the end of the fork. There are two

...2 Remove the securing bolt at the top of the fork on the handle bars. Slide the forks out of the fittings. 3 Place the forks into the oil pan, bottom down, and remove the oil nut. Let the forks ...

...forks fit a yamaha maxter xq 125 need to no if Yamaha yz front forks fit a Yamaha maxter xq 125 just measure your fork leg diameters and compare them to the yz ! you could also see if the yz fork ...