...door: Open oven door fully open. On the hinge there is a small metal tag that swivels up and fits over a small hook on the hinge. Do this on both sides of hinge, then gently close oven door whilst ...
fisher and paykel classic stove and top with four elements model no RA610MAW as we are in the bush we need to know how to change the seal in the oven which the door closes on we have the seal but dont
when burning off your new oven for the first time do you keep oven door open or closed? keep door closed when burning off your new oven. c...
fisher and paykel oven door wont close, there is a gap at the top of the door. The seal seems to be intact. The door feels loose to the touch. you need to either replace - or get the door hinges ...
...oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board that is bad and should be replaced. Hope ...
...oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board that is bad and should be replaced. Hope ...
...door while the oven is 800 degrees? or so. Look just below the little button that gets pushed in when the door is closed, upper left, and you should see a vertical slot. This is where a little lever ...
Question about AeroTech OS302 Electric Single Oven
...Fisher & paykel Aerotech OB76 oven not heat up when using the aero funtions Some ovens require the door to be closed upon accepting the setting desired, AND then for the door to be closed. Reading ...
Question about AeroTech OS302 Electric Single Oven
Fisher & Paykel OS302 wall oven will not get hot with any element. Something has shorted in my oven. I have replaced the X Y capacitor, the thermal fuse, and now the main circuit board. I'm hoping ...
Usually answered in minutes!
924 Questions
608 Questions
343 Questions
293 Questions