Questions & Answers for: fisher paykel fault code 240

Question about Fisher Paykel Intuitive Eco Washer IWL15

1 Answer

...code 130 & 240 how do i fix this rotary position sensor fault. underneath the machine. Unbolt plastic cover with 16mm socket all of the plastic will come off. Undo four 10mm bolts around shaft. ...

Ad

Question about Fisher Paykel Intuitive Eco Washer IWL15

1 Answer

...fault codes 130 and 240 are pertaining to a Rotor Position Sensor problem. It is the part located wedged into the motor stator and it's sole function is the detection of motor functions ...

Ad

Question about (IWL12)

1 Answer

...and nothing else happens until switch off and start again - sometimes completes wash, sometime repeats code. Rotor position sensor fault, a little green circiut board located on the motor

...fisher&paykel mw512au washer stopping mid wash Stop mid cycle alarm sound fills with water and willn't empty out Fault code 240 is RPS 240. (11110000) Hall Out Of Order. RPS Fault Same as ...

Question about (IWL12)

1 Answer

...code 240 240. (11110000) Hall Out Of Order. RPS Fault Same as previous Hall Error faults See fault code130 for directions. 130. (10000010) Single Rotor Position Sensor Error The Motor Control Module ...

...code 130 what do these two codes mean? What is wrong with the machine? Is it going to be costly to fix? 240. (11110000) Hall Out Of Order. RPS Fault Same as previous Hall Error faults See fault ...

...Fisher & Paykel IntuitiveEco IWL16 Top Load Washer 240. (11110000) Phase 6 - Hall Out of Order. RPS Fault Same as previous Hall Error faults, just an extra fault code for Phase 6. See fault codes ...

Question about IWL12 Top Load Washer

1 Answer

fault code 240 w2hat does that mean check in the manual for the error code most of washing machine if the error code is in users manual its means its only minor problem,but if the error code is not in

Question about IWL12 Top Load Washer

2 Answers

fisher & paykel washing machine. It has been giving fault code 240. The rps code. I replaced it with the updated version and also replace the motor control board as advised. No leaks on the underside.

Question about IWL12 Top Load Washer

1 Answer

What does a fault code 240 mean? Try this link out look for page 14 section 2.7.2 Its the rotor. http://ww2.justanswer.com/uploads/thehomesmithy/2012-01-26_160945_gwl15_ph7_usa_ecosmart_517792a1.pdf

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...