Questions & Answers for: Microsoft firm reset

Question about Wireless Notebook Optical Mouse VSBX300008

3 Answers

...reset buttons on both the receiver and transmitter to no avail. Can you help? If I rap the mouse on the desk a couple of times, it then works. Sort of like Fonzi. Being a guy, I started years ago ...

Ad

Question about Xbox 360 Console

2 Answers

...all the power and AV cables from the console. * Unplug the power cord from the wall socket. * Firmly reconnect all the cables. * Turn on the console. If these steps do not resolve the behavior ...

Ad

...tried on different tvs and different AV cables but all the same. I also made sure the cables were firmly in the ports and that the HD and TV switch was switched in the right place. try this take

...an actual repair function. The G.P.U will need to be re-flowed to the main board then lightly but firmly clamp to the board then stress tested (force it to run hot for 15 min shut off and repeat 3 ...

Question about Windows XP Home Edition

1 Answer

...Reset to confirm and try and if the problem exists try download a new ver of explorer from the link http://www.microsoft.com/downloads/details.aspx?FamilyId=9AE91EBE-3385-447C-8A30-081805B2F90B and i ...

...reset. First cause is the most likely a communication error from the G.P.U to C.P.U .The best /most durable repair is to have the G.P.U. re-flowed and then securely re-clamp to the board .This will ...

...you should be good If you are using an av cable make sure the little button on the side is pushed firmly into tv or hd. If you are using hdmi, make sure it is pushed firmly into the console and tv. ...

Question about Wireless Optical Notebook Mouse 4000

1 Answer

...just stopped working. the battery is fresh (the red light is still on) and the transmitter is still firmly in the usb port. When you replace the Battery on a Wireless Mouse you have to link the Mouse ...

Question about Xbox 360 Console

1 Answer

...from the console. Make sure that the power cord from the brick to the back of the console is firmly connected to the brick. then make sure that the cord is firmly connected to the back of the ...

...'Safe Mode', shut down your PC and follow these steps; 1. Turn on your PC and IMMEDIATELY begin Firmly tapping the key in the top row labeled 'F8", once per second, until you see a Menu on a

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Microsoft Computer and Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...