Questions & Answers for: fill switch

Ad

Question about 15864/15862 Top Load Washer

2 Answers

...fill switch. Is there any specific instructions on how to access that? ie how to I remove the top cover? Also if I need to replace is there a part number? Kenmore washers Fill switch pull off fill ...

Ad

Question about 15864/15862 Top Load Washer

1 Answer

...fill. One is a float inside the tub, the second is a tube which fills with water, loops and goes to a pressure switch below the machine. That switch is usually about 1.5 inches in diameter, two wires ...

Ad

GE wcxr1070a washing machine. fills with water GE wcxr1070a washing machine. fills with water but will not agitate. spin cycle works fine and it fills and drains water fine. Check the water level ...

Question about 24032\24036 Top Load Washer

1 Answer

...fill volume. This switch is usually a diaphragm device with a small, clear tube attached between the switch and the bottom of the washer's outer tub. As the water level in the tub increases, the ...

Question about Elite 21086

1 Answer

...switch, wires and timer. Fill valves are very bad for working once or twice and then quitting, if your dishwasher fills the first and second fill cycles and then no more water through the rest of the ...

Question about WBSR3140DW Top Load Washer

1 Answer

Fill switch could be bad, or fill tube could be plugged making water not stop and it keeps filling. The fill tube goes from fill load selector switch to bottom of tub. Remove from top and blow it out.

Question about 24032\24036 Top Load Washer

1 Answer

fill valve switch.The switch detects the required water in the washing machine and shuts the fill valve off,but if the switch is faulty then it will not shut the water fill valve off and this will not

Question about 24032\24036 Top Load Washer

1 Answer

...spin, not agitating. Sounds like the fill switch needs to be replaced. A good way to test it is to set your machine on low fill and see if it fills past 3/4. If it does, it's the fill

Question about 24032\24036 Top Load Washer

1 Answer

switch to fill the machine first before starting agitation,check voltage from the water fill wire off this switch for line voltage,then check from the wire on this switch to the timer for line voltage

Question about 24032\24036 Top Load Washer

2 Answers

...fill with water and will not switch to wash but if you set it to drain and spin it will drain The fill solenoid is stuck in the open position. Replace it for proper operation. Search Over 2 1 Million ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18087 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...