Questions & Answers for: E-Machines figure logic 4

...pages educated me). Now if I can just figure out how to open the case; I took out the 4 screws (on the lower end of the back panel), but it just will not open in any way that seems logical . . . . ...

...figure out where they go I have an emachine that is a 1900+ series and need to know how to wire the power supply. I don't see a place on the motherboard for the 12v 4 pin connector. If you are ...

emachine desktop pc will not power up i have brought a new power supply, replaced the hard drive and still it will not power up flicknasty, take cover off and check with small light and look at all ...

windows xp blue screen STOP: 0x0000007B if it is impossible to reboot my pc due to a corrupt hard drive, are there any suggestions to retrieving my data before reinstalling the operating system? dear,

...(Confirm the pin numbers on your motherboard) J9G1 PINS | HD LED | 1 - 3 | | PWR LED | 2 - 4 | | RESET | 5 - 7 | | PWR ON | 6 - 8 | Hope this helps you figure which pins to hook you switch up

...figure out how to get it off First of all, disconnect the power cable from the electrical outlet and from the back panel. Then disconnect any cables connected to the computer. here is the link to the ...

...figure 3 and 4). A power supply will generally have a few of each size. Figures 3 and 4: Large (left) and small (right) Molex connectors. There is no difference between the two sizes other than the ...

figure out how to remove it from the case. Thanks in advance tip laptop over.look where the cd player is located..on bottom remove the screws around the cd and it pulls rite out.probally 4 or 5 screws

The T4010 emachine does not recognize the keyboard, but does recognize the mouse, is the answer a new motherboard? If replacing the keyboard (try a USB keyboard, instead of a PS/2 keyboard) does not ...

...figure out what order the pwr switch pwr led and hdd led wires plug into the motherboard. On the motherboard, there are 4 sets of 2 pins and 1 set with 1 pin. Can any one help how do i determine what ...