Fiat Panda 1000CL- Turns but will not start I am assuming there is a compression problem but need advice in case I have missed anything! I have recently serviced the car (oil + filter, plugs, air ...
fiat panda with a leak from the coolong system. It has been to the dealer and they have replaced the water pump but it still leaks. We have removed the sump guard and can see that water is coming from
just had a service panda dynamic the battery lead was loose tightened it now every time i start the car the clock resets to zerq any ideas as to what it could be? sounds like a direct power feed from ...
...Fiat Panda 1100cc petrol engine but on lifting the bonnet I could not locate it. I checked with the Car hand book which made no reference to its whereabouts other than at what mileage this should be ...
...fiat panda shows keylock on dash Shows key lock on dash and won't start unless i put in the code How can i reset this a panda ,makes a change from the americans and their jugonauts,but iam ...
...Fiat Panda 1.2 The problem is when the engine is cold, the car will keep cranking on the first attempt and probably fire up no problem on the second attempt although on rare occasions, it can take ...
Question about 2004 Panda 1.2
...fiat panda 2004 becomes jerky at times when i accelerate,the engine failure turn on again After i have drove for a while ,my fiat panda hesistate and ****.The engine failure light turn on again ...
...Fiat Panda 2004, 1.2 dynamic. Whenever I stop the engine and remove the key from the ignition an intermittent beeping sound occurs 3 times, I have no idea what this could be as it is nothing obvious ...
Question about 2007 Panda 1.2
Why does it keep going into neutral and also cuts out now and again? It is going alright and then all of a sudden it will just go into neutral. At other times it will cut out and I have to turn off ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
