Questions & Answers for: fender replacement

Question about 2000 Dakota Quad Cab

1 Answer

replacing front fender need to replace front passenger fender. Hit tree stump in road and had to replace radiator and support for it but when we try to replace the fender, it sticks up about 2 to 3 ...

Ad

i want to replace the passenger side fender of a 05 chrysler 300 my fender is vent so i want to replace the passenger side fender of the car. i want to know what is need to be done. i'm going to buy a

Ad

Question about 1999 Wrangler

3 Answers

Fender Replacement - Place the fender in position against the body without the beading and loosely install one bolt at the top to support the fender. Now start the rest of the bolts. Tighten them just

I am replacing my right side passenger fender. I am unable to take the fender off because the antenna is attached through a hole on the fender and connected to wires underneath so I cannot get the ...

...Connect new antenna to fender ( replacement antenna I ordered was slightly smaller than opening so I had to add washer). Run new antenna cable through wall and plug into coupler. Re-attach ...

Question about 2000 Jeep Cherokee Fender

1 Answer

how to remove front fender Open the hood, look for the bolts that hold the fender to the frame of the car, remove all of those. Then look under the fender behind the tire, remove the plastic pins ...

Question about 1997 Crown Victoria

1 Answer

ford parts diagramsFENDER FENDER MOUNTING REPLACE REUSTED Open hood remove all the bolts holding the fender remove side marker light take off fender it should take you about 45 minutes to remove and ...

...on with plastic push up tabs...remove all under hood fender bolts...probably 13mm...compare your replacement fender to confirm all necessary bolts to be removed, Is your new fender already

Question about Motor 2003 Elantra

2 Answers

replace left front fender Replace left front fender - Fixya www.fixya.com/cars/t26028082-replace_left_front_fender Dec 29, 2015 - replace left front fender - Hyundai Motor 2003 Elantra question. ...

...i get to all the spot welds?how do i attach new fender? Get the replacement fender so you can tell where there at..they make some great epoxy for that now.. They should have it where they sell ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...