...DM8C. Mac I got an email from Fellowes technical support suggesting I use alcohol and a cotton swab on the sensors after unplugging it. That fixed my problem. Best to use the alcohol/cotton swab ...
does not feed paper the motor runs and will not except a piece of paper Had the same problem. The gears inside the shredder have worn out. I overfed the shredder with too much paper and caused the ...
Fellowes shredder has some plastic pieces breaking off from between the blades and it keeps jamming up. I never run staples through it or anything other than paper, so I don't know how the parts broke
Had overheated. Now after several hours the green light and red light go on. No motor sound?? hi, Turn it off and let it sit idle for about an hour. This should cure an overheating problem For no ...
green and red light on. unit will not work. I had the same problem. You need to make sure the bin is pushed in all the way. Especially in the top right hand corned of the bin. That's where the switch ...
paper gets jammed. Even shredding just one sheeet of paper. Clicking noise is heard before the red light comes on. The problem was solved by putting some oil on the top of the shredder and running the
The wait light is coming on just after I emptied the bin and I can't find the manuel to find out what it means. It will not shred anything Sorry, The Eye is fried. Send it back or throw it away. They ...
Question about DM8C Cross-Cut Shredder
I have a Ac-MC1000 and I have cleaned the sensors and oil the shredder and cleaned it out and it still runs contantly when on Auto? I have cleaned the sensors and shedder roller and still it runs ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions