Questions & Answers for: feed tape machine

tape and stick it in the slot. Press the feed button several times. I tried all methods you suggested, but no avail... This is one of the dumbest machines I have ever had. I am having the same problem

...on my letratag sr, the machine runs and tape feeds through but it does not print and the tape keeps feeding through until i switch off the machine ... Try changing the batteries. It worked for

...feed the white tape, the other layers bunch up inside the machine. Called Brother, and they were no help (indeed not much interested in my problem), except to suggest I clean the rollers with ...

...dog cover. Refer to the manual and if this is not addressed, try setting the stitch length to zero to stop the movement of the feed dogs and tape an index card (hole for needle) over the feed

...feed dogs. Securely tape an index card over the feed dogs with a hole punched in the center for the needle. Painter's Blue Tape works well as it does not leave a residue. Do a test sample to see if ...

...feed dogs. Blue painter's tape works well as it does not leave a residue - I also use the tape as a guide when stitching long lengths that are too far from the fabric edge for any other type of

Feed the tape by holding down and pressing , then cut the tape by pressing in on the tape cutter button. The amount of tape remaining is visible through the window in the back of the P-Touch. When the

...Before inserting the tape into the feed mechanism, bend the last 1/8 inch of the tape upward at a slight angle. This will insure that the tape feeds properly. I just learned this by trial and

...the feed dogs? What kind of machine is it ? Not all machines allow you to lower the feed dogs. For those machines, you can cover the feed dogs with masking or similar tape to get a similar

...tape. As you feed the card through the roll of paper foillows. Once it has fed into machine cut off 3 x5 card. Easy. The problem is that all rolls of machine paper are not equal and the thinner paper ...