Questions & Answers for: feed switch mp780

in the rear, and the Feed Switch used to set Auto Sheet Feeder. For printing, in the Printer Properties (or Printing Preferences) dialog box, select the Page Setup tab, and set the Paper Size to Legal

...Feed Switch button, the Start button, and the OK button....all to no avail. What to do? Thanks for the attempt however. If you have any other ideas, please send. This is an on going and recognized ...

...switch feed (left hand side). There are two feeders in the rear and pull out tray at front, very bottom. Hope this helps ! Check your Feed Switch button, located to the left of the orange LCD screen. ...

switch) and tried to clean the nozzles and cartridges, but it won't let me. Help! ok what you have done is when you have pulled the paper jam out you have either still have a small piece of paper over

selectin auto continuous feed.Make sure paper is in both trays of the same type and size.You will hear the printer try and grab the paper three times then it will automatically switch to the next tray

...Feed Switch]. 3. Press [Menu] repeatedly until 3.MAINTENANCE> appears. 4. Use [<] or [>] to select . 5. Press [OK]. 6. When cleaning has finished, repeat steps 3 to 5 for a total of three ...

...feed switch, you can put paper in the bottom tray or the top feeder and you press the feed switch to change from one to the other, when the rollers are dirty and paper doesn't pick up you also get ...

Feed Switch? I will not charge for this one, it is an option, but albeit simple, it works a lot.... just like a computer or re-set devices, there is a chip that can be reset, simply by turning off the

...much of it apart, bu still cant see why it makes the loud noise, also I cant switch paper feed to back, which at least would allow it to print from there... please let me know if you find a

...MP780 all in one is not working when switched on it gives me the erra message ##357. everything is on but its not working. Please help 357 ASF paper feed (AP) position error Cause: An error occurs at ...