Feed dogs on Singer 7466 wont stay up. I was having trouble with my machine sewing and checked the feed dogs. They looked half way up so I tried to up them back down then back up again via the lever ...
singer 2010 wont feed fabric singer 2010 feed dog wont move. recent problem. was working great. what could be wrong? Are you sure the feed dog is in the up position
Question about Touch Sew 7462 Mechanical Sewing Machine
...feed dogs move at all? If not soulds like a busted gear. Take the botom panel off and inspect the gears should be able to get some from a sewing dealer and replace them if your mechanical. watch a ...
feed dogs wont come up on my on singer 3820 Make sure you rotate the handwheel one complete revolution in the forward direction after you switch the feed dog lever back to the up position.
Question about 3116 Simple
...feed dogs are dropped and wont go up or down how do i get it to work feed dogs (the little feet thats under the faberic when sewing) if the feed dogs will not go up or down, even when the lever ...
...fabric won't feed thru then there is something wrong with the feed dogs Hi I have a 507 machine and I am having problems getting the material to feed. What do I need to do to unfreeze the
material wont feed through model number 1120 it's very possible that the feed dogs need to be checked, if their not feeding the fabric thru the machine
Question about 1120 Mechanical Sewing Machine
feed dogs under needle for singer 514 First, make sure the feed dogs are in the up position and NOT dropped for darning. Second, check that the stitch length is set to at least a 2 or 2.5 to make sure
Question about 1120 Mechanical Sewing Machine
feed dogs move above the surface of the needle plate? If not, then the feed dogs have been dropped for darning or they have seized from lack of oil. Wheel on right side that controls the needle up and
Question about 1120 Mechanical Sewing Machine
...feed dogs are stepping (rotary reciprocation), adjust stitch length toward a longer setting. Eventually this should raise the height of the feed dog step to a point above the needle plate thereby ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions