Questions & Answers for: fedders dehumidifier humidity sensor

Question about A7DH45B2A Dehumidifier

1 Answer

...dehumidifier model # A7DH65B2A I can't get this unit to work. The fan runs but never any water. It is in my wet basement so I know there is a need. Any suggestions will be appreciated. unit runs but ...

Ad

Question about A7DH45B2A Dehumidifier

1 Answer

...dehumidifier runs all day but there is only a little water being produced. We have humidity set at 35%, and the actual readings are much higher. This is only a year or so old. The last machine worked ...

Ad

Question about 30-Pint Dehumidifier Dehumidifier

1 Answer

...humidity for the sensor to read. But, at 35% there is. I'd say, your dehumidifier is working as it should. FYI - there is no adjustments to change the factory settings. Hope this helped you,

Question about M7DH45B2A Dehumidifier

1 Answer

...dehumidifier. As finding the part (your unit was made by Fedders), the cost of the part and the labor involved, to me, out ways repairing it. Now, on the positive side ... If you saw water in the ...

Question about A7DH45B2A Dehumidifier

1 Answer

humidity sensor can pickup and increase in humidity, if there is one. If the above doesn't seem to be the problem with your unit, turn The Master ON/OFF Switch to OFF and unplug the unit for 12-15

Question about A7DH45B2A Dehumidifier

1 Answer

...dehumidifier is not absorbing water. It's running and we have rebooted it many times and it's still not collecting water. The model # is M7DH45B2A*A, serial #DR891932099W. I don't know if ...

Question about R6DH45X Dehumidifier

2 Answers

...Fedders like yours. They've been out of business for several years. There are several basic things that can cause what you described. 1. The humidity extraction level is improperly set. Lower the ...

Question about A7DH45B2A Dehumidifier

1 Answer

...humidity condenser sensor has failed. These things usually occur in units that are 5 years old or older. It's rare in a unit younger than that. But, it can happen. Hope this helped you to ...

Question about R6DH45X Dehumidifier

1 Answer

...humidity condenser sensor has failed. These things usually occur in units that are 5 years old or older. It's rare in a unit younger than that. But, it can happen. Hope this helps you to ...

Question about M7DH45B2A Dehumidifier

1 Answer

...humidity option is 35%. According to Maytag tech this part is not available. (Fedders part) Any ideas? could I unplug from mother board and maybe have a continuous run? It may be right. Are you sure ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dehumidifiers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66919 Answers

Are you a Dehumidifiers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...