Questions & Answers for: faulty power lock motor

Question about 2000 Accent

1 Answer

...faulty -Power transistor faulty -Spark plugs faulty -Ignition wiring disconnected or broken -Spark plugs faulty Q2, Engine will not crank A2. Battery discharged Battery cables loose, corroded or worn ...

Ad

Question about 1995 850

1 Answer

...faulty central locking motor or the wiring harness may be damaged. Remove the door panel and check if you have a live feed to the central locking motor when you use the fob to lock or unlock. If you ...

Ad

Question about 2003 Venture Passanger

1 Answer

My second row passenger side door will not lock. The car has power opening and closing. lock asembly sticking or wron, drag link on actuation motor bent or obstructed,faulty lock motor

my left rear door lock will not lock with the rest of the car when you hit the lock button all of the locks lock but the left rear door POWER LOCK MOTOR IS FAULTY

Question about (6981A002AA) for imagerunner 2200, 2800, 3300 Print Server

1 Answer

...faulty. Action 1. Connector Is the connector of the fixing motor connected? NO: Connect the connector. 2. Main power supply PCB Is the drive voltage (24 V) of the fixing motor supplied by the main ...

...You should be able to unplug wiper wiring at wiper motor and run auxillary power to it to see if it works. If it does then fault is in the wiper switch wiring. If still no go wiper motor is

Question about GWL11 Top Load Washer

1 Answer

...power up.They are 1--your motor controller is faulty. 2--Your drain pump is faulty.If you have or can borrow an electrical test meter I can guide you throe finding the faulty part and then repairing ...

Question about 2005 F-150

2 Answers

...faulty Power Window Motors, this is very unlikely though. It would also be a good idea to inspect the wiring for any obvious damage. Check the owners manual under programable locks. Follow the steps ...

Question about Professional SPW1102 11 lbs. Front Load Washer - White

1 Answer

...Power light comes on but door doesn't lock and machine won't fill, drain or spin. Can feel the motor humming. motors don't hum unless there is a faulty start /run capacitor in the circuit the hum can ...

Question about Professional SPW1102 11 lbs. Front Load Washer - White

1 Answer

power in. Motor controller 424317 and or display 424060 seem easy enough to replace, but which part is faulty? I've removed and opened the controller but can't see any obvious signs of burns etc and I

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...