Questions & Answers for: ViewSonic faulty display

...faulty. if another computer (even a laptop) can display on the monitor then the video is set to high for the monitor to understand it. to reset monitor refresh with out a screen that will work you ...

...display a image for about a second. Then the image goes to black and the power light stays green. Does anyone know what is causing this? Monitor going black after a few seconds can be caused by a ...

...display on different computers, you never know that this depends from a faulty video adapter. More likely you will need to replace the screen. you need to replace your monitor. it trips when it gets ...

...display. When powered up video signal displays for less than 1 second and then is gone. Power LED is stays solid green on, have tried other monitors and video signal is fine. Model # VLCDS26105-2W ...

...display any picture even after power supply light shows green. Hello Dear I also have the same problem and finaly I found its power adopter faulty which gives the same voltage as mentioned above it ...

...display is blank. After some time monitor light glows and off in sec. This process continues... But i can feel,hear sound that pc is working in background but no dispay. Plse help One bad lead can ...

...display with low resolution and I am unable to change it in the properties menu? Look to see if cables are ok in the back. You may have a faulty cable or faulty processing board in the monitor. Shut ...

...display comes through. Checked all cable and power supply - all ok (tried with other monitor). Any simple solutions? Since you hadd confirmed that the monitor is faulty with a swap then it seems that ...

...faulty leads will end up with a computer error alsoClick start control panel administration tools computer management device manager scroll to display adapters + to expand you might see a yellow ...

...on the screen from left to right. Check and replace the T'Con board.  It might be faulty. Seek tech