Questions & Answers for: fan warning dlp projector

...warning lights flashing or anything and if I restart its fine again for about 10 mins and does it again. Any help appreciated. Regards. Pls check if the lamp is not so old that is giving the same ...

...warning indicator led lit up means something dis connectivity inside the projector 1)lamp cover switch or its connection from main board 2)fan connectors 3)thermistor connector above casues for ...

...warning light turns on. If the fan does not work does the lamp not turn on also? Help please. On light works, after a few minutes the lamp light comes on, but no fan, no light, color wheel does not ...

...warning indicator. It has power and the fan comes on. Hi Just be aware that the stated lamp projector specs "2000 hour lamp" does not mean you will get 2000 hours. What it means is that the lamp is ...

...WARNING! Sim2 does does not recommend that you change the lamp, they recommend that you contact a local dealer for service. PROCEED WITH CAUTION! If you still wish to proceed. This instruction is ...

...fan locked" warning appeared that was accompanied by a box that said the projector would automatically shut down. I tried to take out the bulb and spin the fan. it rotates no problem. i put the ...

...DLP projector will not start. It is on stand-by mode with flashing blue stand-by indicator and after pushing "on" button it does not start fans as usually. It does something during a minute (blue ...

...warning 15 minutes after start. Fan aparently not enough. I place a tabletop fan and worked fine. this is not a practical solution. Can I icrease fan speed? lamp has 4 hours of life, no warranty. It ...

fan is constantly running or a whirling noise. Is this normal? Mitsubishi rear projection DLP keeps turning off and shutting down. The red light then turns on for a while and then turns off. TV can be