Questions & Answers for: fan switches hi med lo

HI speed on my Hampton Bay ceiling Fan. I have very nice a Hampton Bay ceiling Fan which me and my wife love it. It has three different speed, LO, MED and HI. The LO speed has approximately 84 RPM and

...fan is not producing any airflow. I just found this on another site. The answerer there said he hit "med-hi-med-hi" on the remote. I tried that, nothing seemed to work. I was impatient and frustrated ...

99 Olds Intrigue AC fan Fan only works on max; the other fan speeds do not work try changing the resistor or the fan motor switch (hi med lo)

...fan but it has made no difference can anyone help me please. thanks If you have access to a DC voltmeter; try this: Check for voltage on each of the heater resistor terminals, when it is unplugged, ...

i have a bad off,hi lo,med switch looking for a hi ,low ,med off switch go to lowes and get a universal one

...you have a blown fuse or wire disconnect. If the fan works on HI only, then your blower resistor is shot. This is a common failure and can be replaced at your dealer or by yourself if you are

...fan will not run in lo med or hi, switch or is there resistors on the fan that need checked? When a blower motor does not turn on in low or med. and only turns on high its usally a resistor block. If ...

...hi fan speed. Try pulling the fan chain to see if it starts. Good luck. The fan and the lights are on 2 separate circuits. Have you checked if the wire for the fan is connected too and has power at ...

fan on lo, med, hi or off. Please help. Thanks, Ron Make sure your wiring is correct. You can try switching frequencys to see if that works. Otherwise, you might need a new receiver. That's just a low

...HI fan comes from the "HI BLO MOT" Fuse 53 (30amp) Located in the underhood fuse box- there is also a blower HVAC relay located in there. The LO and MED settings are ran though the HVAC relay to the ...