Questions & Answers for: fan oven sticking help

...oven 1000w The fan is hunting (speeding up and slowing down) as soon as the unit is swithched on. It sounds almost as though the bearings are sticking or on the point of siezing. The machine has ...

...Fan Oven Element - This is very much the same as a light bulb only instead of giving off light it gives off heat. Like a light that is switched On or Off by a wall switch, the Element is switched On ...

...oven,no clock etc. appears unplugged. If un plugged from wall for a few minutes to an hour, it will come on again when plugged in. If fan is used the fan may go on and i will be unable toturn itoff ...

...fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not ...

...oven , it controls the fan and responds to what the stat tells it . It may be this controller is not turning the fan off afterwards , my suggestion is that unless you are electrically trained you get ...

...fan assisted oven on a Hotpoint BD35 double oven stopped working so I replaced the element, thinking that would be the obvious answer. Unfortunately it is still not working and I notice that the fan ...

...oven. Help! What do I do to make it stop? Hi, Will forgo all the greetings. F7 is a stuck or shorted keypad. Try rapidly running / fanning your finger FLAT across the keypad to un-stick it. If this ...

...fan in the elcectric oven ...straight oven on right side...the fan seems to start and then stick making a very loud noise after it is on for a minute. When I opened the oven and observed I could see ...

...fan won't turn off. Please help!!! plug it out from the current socket probably the switch is sticking.service the switch by spraying contact cleaner if that does not help replace the switch.that ...

...fan oven. The fan doesn't always work, seems to stick. What do I need to do to get it working? We've had it less than 3 years but I've never cleaned it. Is this why it doesn't always work and if so ...