Questions & Answers for: false ceiling

Light problem Light will not fully come on, fan sometimes comes on by itself. check and re conect wires with the wire nuts false contact or loose contacts

...Ceiling Speaker The speaker only works when you touch the speaker foam Hi, probably there is a false contatc between the cords and the coil. If is visible could be resolded otherwise the speaker has ...

...I suggest you take a look above the ceiling, if its a false ceiling and you can get to it. or else you will have to use a big flat head screwdriver to pry it loose and touch up the ceiling

false (issue goes away if the door is left open) the door may need to be cut off a bit more at the bottom or a grill installed to allow the air coming into the room a place to go. If none of the above

ceiling fan is still getting power? if the light bulb is off, you don't have power at the lightsocket, sometimes those testers are too sensible, speceally cheap ones. I have a Fluke and also get false

...ceiling adjacent to the floor of the top freezer. the Freezer back t-shape vent goes down to these inlets where the percipitation is coming from. What is this the damper This problem could be the ...

...false sealing area below the unit and near by area. Drain line of the condensate is checked and it is in dechoked condition. Supply line of unit is already insulated and return from the room is from ...

...ceiling. A co/gas detector should always be mounted or plugged-in to a wall receptacle that is at least, but not more than 2 feet off the floor and not in the same room as the gas appliance. It will ...

it is sagging and a crack is shown along the joining line of the jypsum board. it was installed 2 days back.how could get rid of it by doing a little effort. Welcome to fixya Hello I have a solution ...

...double glazing" ACP is mainly used for external and internal architectural cladding or partitions, false ceilings, signage, machine coverings, container construction, etc. Applications of ACP are