failed to initialize I am have an error populate on my screen that read as follows; Failed to initialize scanner for monochrome devices; ensure that IRDA receive and Discovery are off. Pull the ...
INITIALIZE the scanner to bring it back to normal operation. To RESET: - Power the scanner OFF - Power the scanner back ON - Insert a pointed object (paper clip, penpoint, etc.) into the RESET hole on
INITIALIZE the scanner to bring it back to normal operation. To RESET: - Power the scanner OFF - Power the scanner back ON - Insert a pointed object (paper clip, penpoint, etc.) into the RESET hole on
INITIALIZE the scanner to bring it back to normal operation. To RESET: - Power the scanner OFF - Power the scanner back ON - Insert a pointed object (paper clip, penpoint, etc.) into the RESET hole on
INITIALIZE the scanner to bring it back to normal operation. To RESET: - Power the scanner OFF - Power the scanner back ON - Insert a pointed object (paper clip, penpoint, etc.) into the RESET hole on
INITIALIZE the scanner to bring it back to normal operation. To RESET: - Power the scanner OFF - Power the scanner back ON - Insert a pointed object (paper clip, penpoint, etc.) into the RESET hole on
Question about Pro-95 Handheld Scanner
scanner OFF until the INITIALIZE process is complete (M000 and Bank 0 Ch 00 appear on the display). The INITIALIZE procedure will reset the scanner to original factory settings and erase all data that
...scanner used to work fine but all of the sudden it fails to initialize. I have uninstalled and reinstalled, changed to different USB ports, tried downloading new drivers. The scanner is found in the ...
Question about LaserJet Pro M1212nf MFP - multifunction fax / copier / printer / scanner B/W
...initialize is typically a problem with the document scanner...but not always. here is a quick test you can try. Turn the unit off then power it on again. Slightly lift the copy lid as the unit goes ...
Question about LaserJet Pro M1212nf MFP - multifunction fax / copier / printer / scanner B/W
...Scanner initialization failed, and the copy processor board (CPB) is not communicating with the scanner-controller board (SCB). 1. Turn the product off, and then on. 2. Check the scanner controller ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions