Questions & Answers for: face side paper goes down

...face down in the feeder to fax in a 7210 series HP all-in-one. Should go up. There is usually an indication graphic on the feed tray that shows a piece of paper with the corner folded to indicate ...

...face down in the Main Tray. Still it won't load the paper. I have had this problem in the past with printing checks with Quicken but I just put the setting on draft and it works fine. It started when ...

...- use this to see which side of the paper the machine reads (if you can't get it to copy, fax your page to somebody and get them to phone back to tell you which side of the page they've received).

side up or down? Most printers are different even from the same monufacturer. The easiest way to tell is look for the icon near the place where you load the fax. There is what appears to be a sheet of

...face side up por down into the printer when faxing Where you put the paper must be a little icon like a page with lines, if you see this put the paper face up. I am surprise you did not check with a ...

...confuses me everytime. You place the paper face side up when feeding through the loader on top. You can also scan the fax in placing the paper face side down on the glass plate of the scanner

...face up if you have an ADF (automatic document feeder) for single sided pages. When you put the document on the glass line up the upper right corner of the page (as looking at the back of the paper) ...

...out blank First make sure the original document is loaded with the correct side facing down. If not the problem try taking out the roll paper and reload it with the other side of the paper facing ...

what side of paper goes in fax, up or down Face down on the glass.

...face down ( the faxing process actually scans the page , turns the data into signal , transmitted by line to the receiver that deciphers the signal and turns it back into readable data if you put it ...