...tension, needle leave alone (5)' upper looper very loose (2-3) and lower looper tighten up to 6-7 and test stitch. You want the upper looper thread to go right underneath and the lower looper ...
why most of the time upper thread or sometimes lower thread loose while stitching though bobbin thread rolling is tightand tension is 8 Probably not in tension correctly, always thread the top with ...
...tension should be fine at 4, leave them alone. I'd suggest if you can find one, go to a "Getting to know your serger" type class as there is lots of techniques such as seaming on a curve, turning ...
I am not getting an even rolled hem on a heavier fabric. I am only using 3 cones of Maxi Lock. You can not do a rolled hem on heavier material. It is only for thin cloth. You have to do a 3 thread ...
Question about MO-644 Mechanical Sewing Machine
I have the Janome MO644D. The seam is extending far past the edge of the fabric with really big loops. It almost looks like a tension problem, but I've tried adjusting it, flossing the thread ...
what setting are the three threads set on for a rolled hem on a singer ultralock l4sh654 and what is the lever by the plate for? Rolled hemming on any overlocker is usually achived the following way. ...
...tension but relaxes and "fills" out once its stitched into place. Gives that lovely covered look you see on shop bought tablecloth edges. Your regular thread in needle and lower ...
Question about Harmony 9102D Mechanical Sewing Machine
...tension, needle leave alone (5)' upper looper very loose (2-3) and lower looper tighten up to 6-7 and test stitch. You want the upper looper thread to go right underneath and the lower looper thread ...
Question about Harmony 9102D Mechanical Sewing Machine
...fabrics, the thread tension will sometimes cause the fabric edge to roll or draw the fabric up into a tunnel. You may want to add a stabilizer to the fabric to help give it some bulk so the thread ...
...tension (5). You may need to move the cutting blade to the right too. The technique is to cut the fabric wider but with a narrow stitch so the cut edge rolls under within the stitching. You want the ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions