Faber Cristal HC rangehood fan has stopped working. When I pull out the hood the light and fan normally automatically come on. The light works but all of a sudden the fan no longer works. Any ideas on
Question about Faber Axia Isola Plus Kitchen Hood
...Faber Axia cooker hood Bulbs are good but none of the lights work. Looking at bulbs someone has installed one 35w 12v bulb but other three are 20w 12v - maybe transformer was overloaded. Will not ...
Problem changing halogen bulbs on perla rangehood I have a faber perla canopy rangehood. Naturally both halogen lights went out at the same time. In trying to remove them, the panel will not slide as ...
FABER RANGE HOOD AND THE FAN IS NOT WORKING It has lights that work and the fan has power into it as you can hear the buzzing noise in both speeds, but the fan is not working My problem is that i cant
lights and extractor have stopped working no power. Have you tried changing the fuse.
...Faber (Classic) cooker hood but though the extractor fan works the lights dont and they're powered by the same source. The light switch is on and the flap close switch is working ok. Can you explain ...
can you suggest a good degreeser to clean cassete filters tried several products but not very effective I"m not sure what you mean by cassete filters, unless it's two filters. I take mine out and put ...
...Faber hood switch part number 133.0073.597 i need the same part. where did you order it from? thanks. I need a replacement cover for the switch as well. Faber Axia Isola - the switch works but the ...
Question about Inca HC SS Stainless Standard Insert - 630002752 Kitchen Hood
Faber model inca hc 72. The fan makes an odd noise. It still works. it is 11 years old. your hood probably needs a service call to examine the motor, please visit http://faberonline.com/service.html ...
Question about TEND30SS300 Decorative Collection 30" Tender 300 CFM Wall Hood -
Medium Fan Speed not working Lights, lowest fan, & highest fan all work properly. The middle fan speed does not work and does not illuminate when pressed. Switch is probably faulty, or wire / ...
Usually answered in minutes!
1,163 Questions
465 Questions
395 Questions
390 Questions
353 Questions