Question about 2000 F250 Super Duty Crew Cabs
...hard from 1st to 2nd transmission shop says tranny is fine ford dealer reprogrammed PCM may need to have the kickdown band adjusted. it is applied when the trans goes into second gear and in
Question about 1993 F150 SuperCab
...goes while on jacks. The neutral safety switch works and it only starts in the park or neutral positions even though it wants to go. The transmission worked prior to the ring and pinion breaking. I ...
...F250 only goes in reverse, no forward gears. I have a 1999 Ford F250 Superduty and it will not go forward. Reverse works fine. I checked the transmission fluid and it was full. I dropped the pan and ...
...f250 goes into reverse sometimes, other times it doesn't move at all, drive works fine. Any ideas? Check the linkage. Set the parking brake, and examine the transmission where the linkage connects to ...
goes, you will definitely have to get taken care of. Not sure if they are vaccum or cable type on that year. I am going to say that you need your ac recharged. If it is low the compressor will kick in
...goes into place as it should be in reverse but gears grind when clutch is engaged as it is not completely in reverse. its worn by the sound of it ,either the linkage needs a new joint or a bit of a ...
...reverse but when I shift forward it doesn't go,. i can tell that it shifts but it won't go. what is the problem?] i would be checking the shifter cable adjustment first see how that goes ...
f250 superduty 4x4 7.3 dsl ,has no reverse and seems tt to be in drive and reverse while selecter is in reverse position also goes forward in the neutral position You either have a loose shift linkage
...goes in reverse fine but only limps in 1st gear no shifting Could be TCC solenoid, or something similar. Check computer for trouble codes. Even though it's transmission related, it will still trigger ...
f250 4x4 with 5.4l You must disconnect everything and raise up the motor and put in wood blocks to keep it steady on the motor mounts the sump must be able to clear cross member and axle you will most
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions