...F21 code and I followed the above directions...same thing, I found about 55 cents in change, a bunch of lint, and a button, and saved $125 by not having to have a repairman come out!! I had the same ...
...F21 code unscrew the white drain after taking the front panel off and clean the drain. it will be cloged with lint, coins, bobby pins and whatever else can fit in there. LOL 10 minutes and it will be ...
Question about HE2 Plus Front Load Washer
...f21 drain problem several times, and when the tech comes to fix it he is in and out in twenty minutes and usually has a handful of socks or other junk that was plugging up the drain way. He says this ...
...F21". I am not able to open door and buttons do not work. Please help! Plug off the wall first. The filter on your pump is probably clogged with lint and stuff. You have to remove the bottom front ...
Question about Duet GHW9150P Front Load Washer
...F21 error code. If I run it through the spin/drain cycle a couple of times the washer does empty but that doesn?t stop it from doing it again the next load. Help! YOUR "DRAIN MOTOR PUMP" is clogged ...
Question about Duet GHW9150P Front Load Washer
...f21 error). Is there a way to access a lint trap type of thing on this machine?? Or I will welcome any help. Thank You. lon this type of machine there is a lint trap on the lower right of the bottom ...
f21 code actually is a no drain code....the machine has an electric pump behind the cover on the bottom with a lint trap in it....just unscrew the lint filter from the pump(there will be alot of water
...f21_error_code_whirlpool_duet_kenmore Included is a follow-on link that explains how to check the drain pump to clean. You may also have to remove the inlet hose that runs from the bottom of the wash ...
F21 Is a slow or long drain. Things to look for kinked drain hose, Plugged or obstructed drain hose, Possible pump filter screen clogged, Least unlikely is a drain pump failure. The pump filter screen
...F21 code comes up (draining problem). Maytag 9000 series with steam. Too much soap is being used and or lint in the drain pump. Remove the panel and access the drain pump and clean it out. Pull front ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions