Questions & Answers for: f150 hoses

Ad

91 ford f150 300 cu.in.trying to find the pcv valve on the valve cover there is a hose coming out it should be on that hose

Ad

97 ford f150 4.6 the pipe that gos to heater core hose is leaking. is this pipe pressed in? thanks The inlet/outlet pipes (tubing) is an integral part of the heater core. If the actual core is leaking

Ad

...power steering problem with 1996 Ford F150 it is apparently leaking at the connections of the hoses on the steering box itself normally caused by the Ferrel end is worn out so hose has to be

Question about 1990 F150

1 Answer

r&r thermostat 1991 f150 6 cyl The thermostat is located where the upper radiator hose meets the engine usually fastened by two bolts to the engine. After removing the bolts pull the hose assembly

Question about 2001 F150 Styleside SuperCrew

1 Answer

where is the thermostat on a 2001 f150 with a 5.4 L engine? just about all thermostats can be found if you follow the top hose from the radiator to the motor. the thermostat will be located under the ...

Question about 1997 F150 Regular Cab

1 Answer

97 f150 noticed it leaking from a little tube on 97 f150 noticed it leaking from a little tube on the firewall does that mean my heater core is bad?? if it is just the rubber hose going in, the rubber

Question about 1988 F 150

1 Answer

...F150 vacuum hoses I need a vacuum hose diagram for an 1988 Ford F150 4.9L 300 inline six so I know where they all are to go Always refer first to the factory vacuum diagram sticker affixed under the ...

...f150 with a 4.9 6 cyl. engine. It was taken apart to replace the fuel injectors, no vacuum lines were labled. I have a thermactor air diverter solenoid that I cant' figure out where the hoses ...

vaccuum hose is connected to manifold however no suction to brake booster 2005 ford f150 Need vacuum line diagram for 2005 ford f150 or need to know what module could be bad. there is a tear in the ...

Question about 2001 F150 Styleside SuperCrew

1 Answer

ford 2001 F150 power steering hose Trying to replace the pressure power steering hose. How do I loosen the upper hose fitting on the steering sector? With a wrench.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

84619 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

20167 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...