Questions & Answers for: expedition shift cable

...ford expedition gear got stuck on reverse and wont start check the 5amp fuse for the actuator and the 15amp fuse for the brake light switch also check the shift cable and the transmission range ...

...expedition rusted very stiff to shift, how to correct ? have lubed , is it difficult to replace ? The cable is your problem. It is not hard to replace. When you get the new one you will see where you ...

...Expedition will not shift into park and only starts in neutral. Get help, have helper hold set parking brake and hold foot brake, pop shift cable off of linkage bracket on trans, try to shift it by ...

...Expedition in drive, reverse, and neutral, but then i can not get it back into park. Is this the shift tube or shift cable that is the problem? Or is it something else? I can get it into park ...

shift cable has sliped r is park n is reverse ect shift cable has slipped r is park n is reverse What you have here is a broken shift indicator adjuster accessed by removing the steering column ...

...expedition does not shift out of park and all my windows don't go down. what should i do? This all happened today. 2002 ford expedition stuck in park the gear shift would not come out of park You ...

...expedition won't stay in park The shifter will not go into park letting the car roll, what would be the cause and can I fix it myself? More than likely you can fix it yourself. There is a possibility ...

the neutral safety switch on a 1999 ford expedition Eddie Bauer 5.4 liter 2 wheel drive It's on the side of the transmission under the drivers door. The shift cable runs to the control arm it is under

...expedition eddie bauer 5.4 liter 2 wheel drive neutral safety switch is attached on the outside of trans. remove the electrical connections. remove the shift cable/linkage arm that is attached to the ...

...expedition want go in drive but will go in reverse Need much more detail; however, there is a frequency with this truck to have the set screws loosen for the shift indicator. I had this problem and ...