Questions & Answers for: excessive fumes

Question about 1993 S-10 Blazer

1 Answer

code 446 comes on and I smell gas Gas fumes are very strong in the blazer. I had the code reset and it did fine for a while. I was told this is the code for my purge vent solenoid. Can my solenoid be ...

Ad

Question about 2002 Explorer

4 Answers

...crankcase fumes are routed back through the engine to be burned. Excessive gases and fumes from the crankcase tend to carry some oil mist with it, hence the show of oil in the air filter

Ad

Is it possible to get fumes in the cabin of an Audi TT convertible - I notice after long journeys, in excess of 100 miles I often feel nauseous? if you are driving in the open and you have your hood ...

A strong gasoline smell but no appearent leak, what can be the cause? fuel systems have a vent or a purge solinoid which will purge the fumes back to the tank which can in some cases send excess fumes

Question about Porta Potti

1 Answer

to make sure no obstructions, that would stop the flow of fumes from flame, as well as check the flame on burner is nice and blue, and not orange, indicating rich mixture, which causes excessive fumes

...excessive exhaust fumes and the car is running fine. It's a carburettor type, not fuel injection. Any ideas? Thanks in advance, Lee. Hi, Lee, you have lose earth connection somewhere.It is difficult ...

...excessive blow by, for example, the crankcase pressure overcomes the PCV valve and intake of fumes capability, and oily starts showing up in the air filter. Investigate the crankcase pressure and PCV ...

...excessive oil consumption. the PCV system draws crankcase fumes into the intake at idle and lower throttle situations. air going into the crankcase is filtered by the small PCV filter, where the oil ...

Question about 1988 Econoline

2 Answers

fumes from escaping) P0402= EGR Flow Excessive (This could mean the valve is inoperative or burned so it cannot close) The latter one means that exhaust fumes are entering the engine when they shouldn

...will develop a leak more rapidly if the motor mounts and torque struts allow the engine to move excessively.You can start it cold, and with your hands around any sealing areas, should notice the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...