Questions & Answers for: evinrude shifting

...shifting linkage on my 50hp evinrude. I have the cable adjusted all the way out but it will not go into reverse HI I have a 1989 50hp Evinrude 2stroke twin. It was not charging so i have just changed ...

need wireing digram for 40hp evinrude boat with elc st Check out the online info on this site, or on the search window type in 40 hp evinrude wiring diagram and go from there. have a 40hp evinrude ...

...evinrude 115 boat motor disconnect the lower unit from the power head . makeing sure where the shift rod position is . then you will be getting near the water pump impeller .if you get it wrong the ...

...evinrude will not shift into reverse when boat is in water . tried manually shifting, did not work. think shift rod is wrong after replacing impellor. Yes check the shift rod at the shift linkage. ...

I have a Evinrude Ficht 135 that Runs Ok but won't go in to gear, forward or reverse. Any ideas? I have a Evinrude Ficht 135 that Runs Ok but won't go in to gear, forward or reverse. Any ...

...to be able to shift and make the lower unit to last!) get one of these,, its invaluable!!! Johnson Evinrude Manuals 1917 ...

85 40hp evinrude stuck in forward? nothing Evinrude used a shift mechanism located in the lower unit that is actuated by a rod up to the linkage in the motor housing. It could be stuck anywhere along ...

what is the shift rod height for a 1998 evinrude e150elecd 150 hp motor? Try this , hope it helps? http://boatinfo.no/lib/evinrude/manuals/1992-2001johnsonevinrude.html#/0

My evinrude 90 won't go into gear, forward or reverse. I see the lever moving both ways when throttle is applied, but no prop movement. Hey Stanley,,either the shift cable is broken or came undone.. ...

Evinrude 140hp VRO outboard motor. The sliding leg may be hitting something or getting caught on something as you try to slide it into the housing. This could cause it to go into neutral or prevent it