Questions & Answers for: evaporated milk freeze

...LIKE IT'S SUPPOSE I CAN PUT A JUG OF MILK IN THE TOP PART AND IT WILL NOT FREEZE AFTER FIVE DAYS. IT JUST BE COLD; AND THE BOTTOM PART IS COOL PART NOT COLD. check your evaporator (freezer) ...

Our 4 year old GE side by side frig suddenly warmed to 64 degrees. Freezer stopped freezing and is at 43. Motor is running. Really need to know what motor(s) are running (compressor, evap fan inside ...

...freeze something and the refrigerator doesn't keep things cold. Cool yes, cold no. Milk goes bad in 2 days. You will need to unplug refrigerator and remove the rear panel in back of the freezer. Look ...

Fridge and freezer are not cooling well I have a Kenmore with freezer on top. It is about 8 years old. I had trouble closing itf or a few days (the fridge part). When I did close it, it's been about a

evaporated milk 1 quart fat free half and half 1 quart whipping cream 1 cup Splenda vanilla to taste Mix all together. Follow directions for electric ice cream maker. Makes 1 gallon. To make chocolate

Milk freezing and eggs cracking Frdge seems like its always running I can only see one fan in the back is there another one There should be an internal evaporator fan that circulates the air evenly ...

...milk in the door would freeze on top and other days it would not. We turned the temperature from 5 to 4 but still had the same problem. A couple days later, I noticed water on the floor. I took out ...

Milk goes bad but frozen meet keeps good..... Vent freeze up either due to defrost problemt, defrost drain line problem, Evaporator fan problem or even can be your damper motor not opening due to unit

Kenmore Model 10654613300 Freezer over freezing Kenmore Elite side by side refrigerator,,,, Freezer is over freezing rock brick hard, milk & egg & veggie compartments are A-ok !!!! In the freezer side

we have a thetford 3 way fridge that keeps freezing our food especially liquids such sa milk and juice In most cases the thermostat is not operating as it should. First see if the probe is still in ...