Questions & Answers for: eureka vacuum overheating

Question about 1934 Bagged Upright Vacuum

1 Answer

...Eureka, the motor starts making a grinding noise and running hot. The vacuum is only a little over a year old but can the motors burn out on these that fast? The vacuum has not been clogged or ...

Ad

Question about 2961AVZ Bagless Upright Vacuum

1 Answer

...Eureka 2961 avz bagless vacuum, and if it's on for a few minutes i can smell the belt burning. If the vacuum is left on any longer the belt starts smoking. I took the case off and there was a little ...

Ad

...Eureka upright before I realised the problem wasn't with the belt. The pully that one end of the belt goes around gets so hot it burns through the belt in a matter of minutes. Can this be fixed or is ...

Question about Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum

1 Answer

...aeureka 450, it stops suddenly when I vacuum? HELP When ever i vacuum, i get one room done and then the vacuum stops. the motor is probably overheating. you will probably have to replace the

Question about Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum

1 Answer

...Eureka Capture Bagless vacuum overheated and shut off, and now (over an hour later) it won't come back on. I've cleaned the 2 filters, the air passage behind the container, and the hose. Any ...

Question about 431A Optima Bagless Upright Vacuum

1 Answer

vacuum overheated and shut down yesterday... have checked for any obstructions, and found none. Now sounds like motor is working very hard, and has very little suction. these are called "universal ...

Question about 431A Optima Bagless Upright Vacuum

1 Answer

...Eureka Pet Lover 460AZ vacuum. It has been overheating and sounds louder, kind of more high pitched, than it should. There are no clogs and the filter is newly replaced. I am at a loss. help? it is ...

Question about 4242A WhirlWind Rewind Bagless Upright Vacuum WhirlWind Rewind Bagless Upright Vacuum

1 Answer

won't turn on i was vacuuming and it just stopped working If it comes back on after a while it may have overheated from a clog or the filters need cleaned or replaced.

Question about 4242A WhirlWind Rewind Bagless Upright Vacuum WhirlWind Rewind Bagless Upright Vacuum

2 Answers

Eureka vacuum model#2961 Won't start??? Well documented issue, overheating, melted cheap wiring, cheap burned out switches made in China, a Dyson, it is not! Had exactly the same problem with my ...

Question about 4242A WhirlWind Rewind Bagless Upright Vacuum WhirlWind Rewind Bagless Upright Vacuum

1 Answer

Eureka rally 2will not turn on feels warm cleaned filters and replaced bag wich was full damaged or failed switch -motor --wiring --or overheated motor

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...