error number 3 i've take out the paper, but still cannot solve the problem Don't know if it's the same problem i had but its maybe worth a try. My paper went in a little, the wheels were turning but ...
...error I run 110 lb card stock in copy mode (nothing on glass so ink is not used). After a few tries printer started picking up paper. I run several times and now it seems to be working. I guess it ...
thin card, a magazine cover is what i used, make sure its A4 size then try to print something, as the paper starts moving push it through! and hey presto it worked for me, everything printing fine now
...Error message was blinking, but somehow I got the printer moving again. I tried to print again, but this time the printer would take 1/10 of the whole page and stop, even though rollers were moving. ...
...error on the printer comes up...;and the message on the computer is paper jammed...remove paper and reset to continue printing. i've already done the following and no results: air blown with ...
...thin metal rod attached on the side of the gear holder. for repair purposes, take that outand make it as straight as possible and fix the rod again. then disjoin the gear with spring in between and ...
error. I have tried to clean the rollers and I have looked all around the inside, there is NO paper anywhere. I have turned it off (for several days) and back on. I cannot do anything with the printer
...error code E04 Open the printer (like to change the cartridges) and look for any bits of paper or other material that may be between the rollers that may have torn off of some printer paper and just ...
...thin card stock through the front manual feed on the printer. It jammed coming out of the drum and gave me a paper jam message. I took out the toner & drum assembly and pulled the card stock out ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions