error head open"...we have reinstalled the ribbon and paper, cleaned the paper path and laser eye, but still getting "head open error" when the lever is definitely down in the correct position. If you
...error light are all constantly on. The printer powers up and will not go any further. Could this be a mother board issue????? Anyone's help would be greatly appreciated... Thanks in advance The ...
...Error Condition HEAD OPEN Power in Yellow color Pause in Orange color Error in Orange color... try to move the silver plate (under the printhead) up a litle bit. this silver plate is the "print head ...
...error remove please help me When you open the print head to change labels, the ribbon tends to slide to the right (up the printhead) so...when you close, the ribbon is no longer over the ...
...error condition head open, i am change the ribbon and tage but problem not solve First clean the sensor tag and sensor head open and tape. Then perform a calibration label pressing the PAUSE and FEED ...
Question about 220XiIII Label Printer
...Error Condition Head Open will not go away I tried every thing I could think of to clear this message on my zebra 200xiIII, but I cannot seem to clear it. Any advice, thanks in advance. The head open ...
...printer and open and close the print head and the error is cleared. Then unpause the printer and does the same thing. Anyone any ideas? Thanks sensor not working or dirty in the feed path id ...
...Head Open Error Print Head open error but it is not open. Calibration did not work the flag inside the printer was moved out from sensor, you will have to adjust and tied the screw a litl bit as
...ERROR CONDITION HEAD OPEN this printer is no longer supported by zebra. i could not find a service or parts manual but i can say there is a switch inside it that is made when you close the head. you ...
Question about 105SL Thermal Label Printer
...Error HEAD OPEN (head not open!)I turned off the printer from the power supply and from the computer,still flashes DATA and I cant reset printer to factory default?! try zebras website for ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions