error code Sc101 I have a lanier Copier 5265 And every time i start it the code SCqo1 pop up and it can't make a copy. What are the possible problems... See if the exposre lamp lights up. SC101 can be
ERROR CODE SC101 RICOH AFICIO 1013 CODE SC101 I WAS SENDING FAX AND HAD A POWER OUTAGE. WHEN POWER CAME BACK ON, THE MACHINE SHOWED ERROR CODE SC101 FUNCTIONAL PROBLEM AND RECOMMENDS SWITCHING OFF ...
...is burning. Hello! There you are. You asked the question but you already know the answer. The exposure lamp are burned so... this error code appears in the display. You need to change the exposure ...
Ricoh photocopier 1055 code sc101 for sc101 Exposure lamp error The standard white level was not detected properly when scanning the white plate.
...2075 error code sc101 Ricoh MP 2075 SC error 101. Found that the Exposure Lamp would stay on after reaching home position and this fault would appear. Found the solution was to replace the IPU ...
Question about Aficio 1022 All-In-One Laser Printer
my aficio 1022 is showing code sc101. How can I fix it SC101 is scanner home position error. Check the sensors or the white plate, usually its dirty.
Question about Aficio SP 100SU e Laser Multifunction Printer Monochrome Plain Paper Print Desktop
ricoh aficio sp 100su has error code c6 SC101 c6 C CIS Lamp/Scanner Motor Error A problem occurred with the CIS or scanner motor in the flatbed scanner: -Carl
Question about Aficio SP 100SU e Laser Multifunction Printer Monochrome Plain Paper Print Desktop
error code sc101 my dear you chek exposer lamp
Question about Aficio SP 100SU e Laser Multifunction Printer Monochrome Plain Paper Print Desktop
...I switch it on it gives me error code sc101, I understand its related to scanner, which part of the scanner should I fix. see the link ...
Question about Aficio SP 100SU e Laser Multifunction Printer Monochrome Plain Paper Print Desktop
...error code 101 / SC101 is an exposure lamp error or the SBU board is defective. It can also mean the standard white level on the glass was not detected properly. Also, check if the scanner is blocked ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions