Questions & Answers for: Jeep Grand Cherokee eraser battery

Ad

Question about Jeep Grand Cherokee

1 Answer

inspection rejection due to inop K,A,M inop kam (keep alive memory inop) recently rejected for sticker due to kam not operating. battery was not diconnected nor were any codes erased or eec test taken

Ad

I put coke (soda pop) on my battery posts to clean them and now when it starts I have to hold my foot on the gas. 97 Jeep Grand Cherokee limited. It sounds like you have a brand new problem besides ...

Ad

My Grand Cherokee Laredo had an accident & Battery was Discharg My Grand Cherokee Laredo had an accident and was parked for 6 Months, awaiting Spare Parts from North Carolina. The Battery got ...

Question about 1997 Grand Cherokee

1 Answer

1997 Jeep...cooling sensor bad keeps coming on but not over heating. This is a common provblem with this sensor; first unplugged the sensor and clean the harnesses pins. Erase the ECU stored codes ...

Question about 2002 Grand Cherokee

1 Answer

I have a 2.7diesel grand cherokee 2002 i have to disconect the live battery lead and reconect it every morning and it then starts ok for the rest of the day. Dear, The problem is from trouble code ...

Question about 1996 Grand Cherokee

1 Answer

Changed o2 sensor and to reset how do I do it Disconnect the positive battery cable for 15 minutes and the computer will erase any codes in memory.

Question about 1997 Grand Cherokee

2 Answers

how to turn off CHECK ENGINE light wth my self Thanks for choosing FixYa. You need the computer scanner to erase the code. If you don't have one, take it to Autozone and they can erase it for free

Question about 1994 Grand Cherokee

1 Answer

check engine lights code 31 how to erase Disconnected the battery cables few minutes to reset your computer; if your check engine link come on again, and your code 31 - Fault EGR... first need to ...

Question about 1994 Grand Cherokee

2 Answers

How can p0123 sensor be reset? You can clear the code by disconnecting the battery, (both cables) for approx 10 minutes. But if you have a problem, that code will come back in under 35 miles of ...

Question about 1993 Grand Cherokee

1 Answer

this Greg thanks . how do I clear the code? Clearing CodesPrint Stored faults should only be cleared by use of the DRB-II or similar scan tool. Disconnecting the battery will clear codes but is not ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...