Questions & Answers for: Jeep eraser battery

Ad

Question about 2004 Liberty

1 Answer

check engine light my check engine light is on from o2 sensors getting low voltage, and also speed sensor failure. i have replaced the o2 sensors and the speed sensor. do you think i might need a new ...

Ad

inspection rejection due to inop K,A,M inop kam (keep alive memory inop) recently rejected for sticker due to kam not operating. battery was not diconnected nor were any codes erased or eec test taken

Ad

Question about 1997 Grand Cherokee

1 Answer

1997 Jeep...cooling sensor bad keeps coming on but not over heating. This is a common provblem with this sensor; first unplugged the sensor and clean the harnesses pins. Erase the ECU stored codes ...

Question about 2002 Grand Cherokee

1 Answer

I have a 2.7diesel grand cherokee 2002 i have to disconect the live battery lead and reconect it every morning and it then starts ok for the rest of the day. Dear, The problem is from trouble code ...

Question about 1996 Grand Cherokee

1 Answer

Changed o2 sensor and to reset how do I do it Disconnect the positive battery cable for 15 minutes and the computer will erase any codes in memory.

Question about 1997 Grand Cherokee

2 Answers

how to turn off CHECK ENGINE light wth my self Thanks for choosing FixYa. You need the computer scanner to erase the code. If you don't have one, take it to Autozone and they can erase it for free

Question about 1997 Grand Cherokee

2 Answers

How can p0123 sensor be reset? You can clear the code by disconnecting the battery, (both cables) for approx 10 minutes. But if you have a problem, that code will come back in under 35 miles of ...

Question about 1993 Grand Cherokee

1 Answer

this Greg thanks . how do I clear the code? Clearing CodesPrint Stored faults should only be cleared by use of the DRB-II or similar scan tool. Disconnecting the battery will clear codes but is not ...

How do I reset the ABS,ESP and Trac lighte after the senser is replaced. tried disconecting the battery for 30 mins. You can find someone that will lend you an OBDII scanner, and learn to use it as ...

2010 jeep liberty no start with gate lite on dash engine won't crank in cold start, battery fully charged The rear gate is the rear door at the back of the vehicle..Open and shut it to make sure it is

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85108 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...