...channels for my scanner There is no global clear/erase function on the BC350C, but programming a new frequency on a channel automatically deletes/erases the old frequency. To delete an inactive or ...
Question about BC350C Base Scanner
...channels and start over putting in new ones i have a uniden BC350C NASCAR EDITION BASE SCANNE There is no global clear/erase function on the BC350C, but programming a new frequency on a channel ...
Question about BCD396T Handheld Scanner
...uniden 396T. Last night control channel on one band(Seattle Police) worked great. This morning it cannot find control channel. Went to control channel in the radio and made sure it was marked yes. ...
uniden 8c60xlt how to progam the scanner Make sure you have fresh batteries,turn on the unit,press manual,enter the channel number,press manual,enter the frequency you want,press E enter,if you make a
Uniden Bearcat BC60XLT-1 Programmable Hand-Held Scanner Press Manual, enter the channel number, then press manual again, enter the frequency you want including the decimal point, then press E to enter
...uniden bearcat 30 channel 10 band scanner model BC60xlt and i need the freq for the albany ga area Press Manual,enter the channel number, then press MANUAL, enter the FREQUENCY you want including the ...
...erase all data that you've programmed into it and return it to its original factory settings.To do this: 1. Power the scanner OFF. 2. While holding in the 2, 9, and HOLD keys, power the scanner ON. ...
...erase all of your programmed data. If you don't want to lose everything, you can just program 0.0 (zero decimal zero) in place of each unwanted frequency. That will clear those channels and they will ...
...erase channels already programmed On SOME of these radios, you can hold down the #2 key and the #9 key at the same time that you turn the radio on, and it resets all data in the scanner. Let me know ...
Question about BC248CLT Base Scanner
How do I erases the codes off of my Uniden scanner Model BC340CRS.It is stuck on one code and won't scan. If the scanner is stuck on a channel you do not want press the L/O button.
Usually answered in minutes!
980 Questions
644 Questions
497 Questions
317 Questions
274 Questions