change mode dear sir, i have some problem with eoc-3220 ,the problem is that i can not change mode to bridge,could you help me plz? what and how r u doing it?
Comando para ver clientes conectados Alguien sabe que comando se puede usar para ver los clientes conectados al AP mediante telnet. Busybox v1.00 After logging into the EOC-3220 with Telnet, enter: ...
how do i reset my Engenius EOC-3220 i forgot my login ip please can u help me to find a solution This might be helpful http://www.fixya.com/support/t629167-getting_setup_pages
whats up man i cant open google try to ping 74.125.45.100, 74.125.67.100, 209.85.171.100
unable to open engenius 3220 with 192.168.1.10 trying to bridge my Engenius 3220 to my Netgear 614 it's not possible. hardware not match
Data communication problems accross my WLAN Bridge I have two buildings connected via two EOC3220s. One is set to Bridge, the other to AP, and the AP side has an 8 port ProCurve managed switch with ...
problem using 2nd hand AP senao EOC3220 EXT I have senao EOC 3220 EXT that my friends gave it to me and i don't know how to use it.As far as i know, this thing can use to connet to the internet with ...
antennas Number one, this isn't a clear question. Number two, you have no choice of antennas with the EOC-3220 unit, only the built-in directional antenna.
i have EnGenius EOC-3220 (EOC3220) i can not reset with my null serial cable please help me Depending on the serial cable you have, you may need a modem (crossover) adapter between the cable and the ...
unable to connect to eoc3220 thru serial or network, any ideas If you can connect to another, known-good EOC-3220 using the same serial cable and software setup, then your other EOC-3220 is probably ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions