Questions & Answers for: engine surges turn wheel

...surges for two seconds, normal for two seconds). It occurs in all the gears. As soon as I back off to half throttle or less, the engine smooths right out. I hope you can provide some insights into ...

...surges and stalls, it is the idle speed control air-bypass valve and throttle valve, they get full of gunk over the miles and cause idle issues (stalls) like yours, Get a can of intake cleaner from ...

...steering,turn the head lights on etc.Sometimes the engine even stops when I turn the steering wheel with the lights on (at tick over). Thank you Have your alternator checked for power supply under ...

engine surges when you turn the steering wheel we have a 2002 ford windstar, when in park or at low speeds the engine revs and lurches forward when the steering wheel turns. when we put it on the ...

...engine idle speed, do the procedure below. Here is the common cause of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in ...

...engine idle go up 1500rpm @idle and surges at 4000rpm and 5k while driving, found 2 vacumn hoses cracked(rprd),no help! replaced spark plugs.no help! rplcd IAC (no help)! pulled new codes showed TPS ...

...wheel speed sensor wires. It should not affect the starting of the vehicle, unless, somehow the blowout caused a voltage surge which affected the computer, but I don't think this is the case. Is the ...

engine turn AC on full blow then connect can to low pressure port its the smaller of the two connections and let the engine draw the gas in ,do not put more than 500 grms in as overcharging the system

turn it on and when I shift it to reverse it does it more, it sounds wierd and the steering wheel shakes more too. The car also jerks when I shift to drive or reverse. What can it be? I heard it could

...turn the steering. Transmissions can also affect how an engine behaves when their put into gear. Do you know if it has been serviced in the past? Have you had it scanned for OBD Trouble Codes? All ...