...do this. I found statements made about some kia's needing a new crankshaft pulley and bolt for similar condition but not necesarily your engine. Youd have to call kia on that one. Hope I helped. ...
kia sedona 3.5l stops running after about 8 minutes, it will crank but not start for a while then problem re occurs Unplug the plug wire head and put it close to the engine mount. Then have someone to
...mounts on the top side of the motor driver and passenger. And (1) last one on the rear of the engine. i think it two but give these websites a try www.alldatadiy.com and www.autozone.com if all fails ...
...under the engine cover I'n going to charge a/c 2005 kia sedona It is on the passenger side of the engine compartment, toward the front of the car. In front of the motor mount, down in the fender
where is the crank shaft sensor loacated in a 2005 Kia Sedona Crankshaft position sensor is mounted on the engine block close to the transmission housing, in front of the crankshaft ..
need to replace front & rear motor mounts on 2004 kia sedona v6 need to replace motor mounts you need to lift the engine to replace the mounts try a block of wood on top of a floor jack
...engine mounts in a Kia Sedona 2003 After it rains, engine rattles and jolts, yellow engine light comes on. I was told I needed a new rear engine mount at recent inspection, plus they recommended the ...
mounts kept disentergrating on the one I had so I found some plastic wheels like what comes on a skateboard and used them instead of the replacement part. Believe it or not they work great. Don't feel
...engine mount 2004 kia sedona v-6 can't get the frame mount bolts loose(no room, bad angle) They are not much fun are they? That is why I have 5 different style wrenches and 15 different style sockets ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
