Questions & Answers for: engine locked gmc canyon

Question about 2004 Canyon

1 Answer

GMC Canyon 2.8L 4 cyl. 5 speed. has a starting problem that happens about twice/week. the engine would crank but will not turn over. After the 12th or 13th try of cranking it over it finaly fires over

Ad

...GMC canyon will not start from time to time. This doesnt happen all the time but twice we have attempted to start our canyon and it will not start. The motor turns, but will not start. All lights and ...

Ad

...GMC CANYON and the check engine has come and stayed on. I checked the gas cap, it was on and tight, checked the oil it was full, just had it changed 2 weeks ago, checked the water and it was fine. is ...

Question about 2005 Canyon

1 Answer

...GMC, 5 cylinder. Ignition switch times out on security code that leaves me sitting for about 10 minutes before re-trying to start. Starter engages, but fuel is shut off.Local Chevy dealer is ...

Canyon starts but won't go into drive and no instruments Truck starts locks work has aftermarket radio. Radio plays but fuse is removed. Must be wired to another circuit. No instrument lights or ...

DOOR LOCKS BLOWER DOME LIGHT GO OFF AND ON ENGINE STOPS ABRUPTLY MOST ANOYING AND DANGEROUS IS THE ENGINE STOPS ABRUPTLY, REPLACED ALT AND EQUIV OF PLUG WIRES NO CHANGE, NOW DOOR LOCKS LOCK AND UNLOCK

Question about 2006 Canyon Extended

1 Answer

hOW CAN I FIX THIS PROBLEM SOUNDS ELECTRICAL MOST ANOYING AND DANGEROUS IS THE ENGINE STOPS ABRUPTLY, REPLACED ALT AND EQUIV OF PLUG WIRES NO CHANGE, NOW DOOR LOCKS LOCK AND UNLOCK, THE BLOWER STOPS ...

engine will crank but no start , GMC 2007 Canyon disconnected battery ( NEG) , checked fuses , disabled command start. Fuel pump running with key initially turned, but the armed lock is enabled.Hooked

...engine compartment Check fuses 21 and 42. https://my.gmc.com/content/dam/gmownercenter/gmna/dynamic/manuals/2005/gmc/canyon/2005_gmc_canyon_owners.pdf I have a 2006 and from time to time the same ...

i changed switch on 2009 GMC canyon and engine lock light is on will not start If you changed ignition switch, check to see that key sensor is properly connected.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...