Questions & Answers for: engine cut yukon denali

...cut out. have anyone experience this? Oh - this started happening when I filled up my tank and then added a bottle of STP gas cleaner to my tank I don't know what the STP cleaner may have done; I had ...

...Engine Soon" light goes on. My son checked it and it it reads on his gadget: Heater Bank Sensor 1 Bank 1. How important is this to have this fixed. Right away, no rush? How much? no rush at all, your ...

...cut off but it would start back up right away. But when i'm driving you can feel it start to loose power then it acts crazy with the ebreak light flashing and the check engine flashing before it cuts ...

yukon denali xl heater fan stop working the front work sometime I have a pontiac that had the same issue. It was a corroded connection at the blower fan. Usually located at the back of the engin comp,

...cut off switch and if so where The is not. The only manufactuer that uses them is ford. Do you have a lack of power to the fuel pump? FUEL PUMP FUSE AND RELAY IN FUSE AND RELAY BOX IN THE ENGINE ...

...cut out... What i want to do till i can fix it is set the wiper arm back to the original position as it is stuck in the "up-right" position, i can't get to the bolt to do so. Is the ...

...engine light and about 100 miles or so the light caome back on with the same code for the canister vent valve being bad but i want to get it off to test and make sure it is not gummed up or if it is ...

...Yukon 4x4 (not the Denali) A/C fan cuts out completely at specific times. I have a digital display with automatic ability. The fan works properly when I have it set to A/C with any fan setting (even ...

...cut-out" for several minutes. This is sort of a warning that shut down mode is coming. I pull over, put it in park or neutral and just rev the engine 4-6 times. Put it back in drive and get back on ...

...yukon denali xl, and my truck keeps cutting off mid stride.... The service stabilitytrak and engin light comes on... When the car cuts off we have to let it sit for about 20-30 minutes.. have the ...