Questions & Answers for: encoder strip

Ad

Question about 924 All-in-One InkJet Printer

1 Answer

...Encoder strip is Dirty. 4. Encoder strip is Out of position. Solution: 1. Open the front cover and check if ink cartridges lids are properly snapped in. 2. Turn the printer off and pull out the power ...

Ad

Question about 942 All-In-One InkJet Printer

1 Answer

...Encoder strip is Dirty. 4. Encoder strip is Out of position. Solution: 1. Open the front cover and check if ink cartridges lids are properly snapped in. 2. Turn the printer off and pull out the power ...

Ad

Question about 924 All-in-One InkJet Printer

1 Answer

...Encoder strip is Dirty. 4. Encoder strip is Out of position. Solution: 1. Open the front cover and check if ink cartridges lids are properly snapped in. 2. Turn the printer off and pull out the power ...

Question about 924 All-in-One InkJet Printer

1 Answer

...Encoder strip is broken or its out of printer . However if you see encoder strip inside the printer connected from left to right, try these steps. Solution: 1. Cleaning the encoder strip: a. printer ...

Question about 962 Photo All-In-One InkJet Printer

1 Answer

...Encoder strip is Dirty. 4. Encoder strip is Out of position. Solution: 1. Open the front cover and check if ink cartridges lids are properly snapped in. 2. Turn the printer off and pull out the power ...

Question about 924 All-in-One InkJet Printer

1 Answer

...Encoder strip is Dirty. 4. Encoder strip is Out of position. Solution: 1. Open the front cover and check if ink cartridges lids are properly snapped in. 2. Turn the printer off and pull out the power ...

Question about PSC 1510 All-In-One InkJet Printer

1 Answer

THE PRINTER CARRIAGE GOES TO THE RIGHT AND WILL NOT RESET, THE YELLOW LIGHTS COMES ON, AND THE ERROR MESSAGE SAYS PRINTER CARTAGE IS STUCK. It may be that the encoding sensor or encoding strip may be ...

Question about A940 All-In-One InkJet Printer

1 Answer

...encoder strip Gently move the top part of the printer belt to the right. Using your index finger, gently push encoder strip down and then back up to get it back into the slot located on the back of ...

Question about A940 All-In-One InkJet Printer

1 Answer

...Encoder strip on a designjet 500 24" 1. Remove the left hand cover 2. Remove the right hand cover 3. Remove 1 T15 screw that secures the Encoder strip to the left encoder holder 4. Release the ...

Question about A940 All-In-One InkJet Printer

1 Answer

Encoder Strip on the A940 All-In-One Printer To reposition the encoder strip, perform the following steps: Remove the power cord from the unit. Lift the lid of the unit, just below the scanner portion

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...