Questions & Answers for: empty hayward sand filter

Question about SAND FILTER, PRO SERIES

1 Answer

...of the lateral assembly out of place. Unfortunately the only way to check is to empty sand to below lateral assembly to check for broken or raised "legs". My backwash was also clean...hope it ...

Ad

Question about SAND FILTER, PRO SERIES

1 Answer

...Hayward s200 sand filter for above ground pool Fill the empty and cleaned tank about half way with water, cover the stand pipe in the filter with a plastic cup or some other means to ensure sand will ...

Ad

Question about Pro Series 18" Above Ground Pool Sand Filter System with Pump

1 Answer

...empty the sand ou of the filter? Thank you for posting your question here on Fixya.com. You need to empty the sand out and replace the lateral assembly too. It attached to the bottom of the valve and ...

Question about SAND FILTER, PRO SERIES

1 Answer

...Hayward S220T pool filter. I have read that after taking the sand down to a 'lift-able' level that I could just turn it over to empty the rest of the sand, but I would think that could damage the ...

Question about SAND FILTER, PRO SERIES

1 Answer

...hayward sand filter You will have to remove the sand so you might as well buy new sand. Remove drain cap and allow to drain. Remove multi port valve from top of filter. This model should have a clamp ...

Question about S220t Top Mount Pro Series Sand Filter 22" Tank Include Top Mount Valve

1 Answer

...Hayward S220T Pro Series Sand Filter. During normal operation, I am getting sand in the pool, through the inlet vents. I am wondering what the problem could be. I suspect the spider-like laterals in ...

Question about S310t Sand Filter with 30 " Tank and Multi Port Valve

1 Answer

...hayward S310T filter, cleaned 2 months ago sand replaced with "glass" and all ok. This week i did a backwash and rinse and vave put back to filter and now the filter empties via the ...

Question about SAND FILTER, PRO SERIES

1 Answer

...Hayward Pro series Model S 180T and my pump is not pulling in the water through the skimmer like it did, therefore I am not getting the circulation in my pool like I had in the past. I checked all my ...

Question about SAND FILTER, PRO SERIES

1 Answer

...hayward sand filter. It was recommended by the local pool distributor to add a 50 pound bag of gravel to the bottom and then 200 pounds of #20 sand. Should we remove the gravel?? The problem was you ...

Question about S166T Pool Filter System w1 HP PumpS166T92S ()

0 Answer

Hayward sand s166t. We opened pool 2 wks ago crystal clear. Hooked up filter after 1-2 days water went cloudy and is now thick milky texture. Also had 7 days of heavy rain. But the pressure seems ...

Not finding what you are looking for?

Categories:

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

David Spradling
David Spradling

Level 3 Expert

13524 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...