Questions & Answers for: elmo power

...Elmo is on? I plug in the power cord, switch on. Nothing happen. Do we suppose to see the light come out from its head? How do we know the Elmo is on? Thank you. use another power cabel-dissconect ...

Need software I am running a slide to video operation and would like to automate my Elmo TRV-35H with zoom in, iris control, timer, etc. I need the software that will allow my computer to do this via ...

...very critical on the exact amperage that the power supply delivers. We have hundreds of tto2 and a few have had this problem. Elmo is aware of the problem and your warranty should cover the

the bulb? the camera? My ELMO unexpectedly stops working during class. The blue power light is still lit but the ELMO is not recognized through my projector. Any suggestions on what the problem may be

Projector takes 30-40 min to recognize signal from elmo 110xg What could be causing my projector to take up to 40 minutes to recognize the signal from the elmo? Sometimes when it finally does it is ...

...power button flashes but there is no light. Elmo TT02 models come with a five year factory warranty, and from my experience, Elmo will usually repair your camera even if it is out of warranty at ...

...Elmo TT-02RX document camera is not working properly. The blue power light does not stop flashing when I turn it on, and I am unable to use the camera or switch over to projecting what is on my ...

ELMO has green flashing light next to the camera button green flashing light next to camera button and won't turn on I had the same problem with my TT-02s. I bought another used one. Same problem. The

i bough a 300vdc highvoltage power suply i dont know how to conect the ac power line Sounds dangerous. Are you sure it is not 30.0 VDC?

power source i.e. the batteries; and dry everything before turning it on ! The circuit itself is a small card. There are a few discrete components that are wired to the card. Check the connections. If