Questions & Answers for: elliptical has no power

power cord? all we are looking for is a power cord. found nothing online... ideas? you can find the power cord at fitnessrepairparts.com Contact [email protected] they have them in stock.

...elliptical and ordered the power cord...but cannot find where to plug it into the machine! Do you know where on the machine it goes into? Thank you. Front of the elliptical, 4-5 inches up from the ...

...power pack? The model number you posted is for a treadmill, not an elliptical machine. If you can locate the specific elliptical model # located on the frame decal (where the serial# is located) we ...

elliptical Display turns on but no resistance and no RPM More than likely your going to need a console...If you checked all the power from the console down to the resistance motor and that's good then

...elliptical does not turn on I would start the troubleshooting process by confirming power at the wall outlet. If this checks out, follow power from the wall to the end of the cord. If you still have ...

...elliptical ocean program with no power cord.The sticker on trainer is torn,it has 6v but thats it. Googled & found nothing on Power cords or power sup needed to turn on thanx again,kirsti It could be ...

Elliptical Cross Trainer I especially want to know about the power source. There is a socket near the base which is clearly intended to have a DC power input, but I don't know what voltage etc. Manual

...power supply, unplug your elliptical trainer and then check the power cord. Replace the power cord if it is frayed or damaged . If the power cord is intact and properly connected to the console, then ...

Power source: Ensure that the elliptical is properly connected to a stable power source. Check the power cord and make sure it is securely plugged into a working outlet. Examine the cord for any signs

...Elliptical Trainer no power after moving. Recently half disassembled and moved. Once back, no power to display. All connections and fuse okay. What to check??? Question edited for clarity. Question ...