Questions & Answers for: electrolux vacuum central vac problems

electrolux central vac, floor sweep malfunctioning This is driving me nuts. The switch for the floor sweep does not turn the suction on or off...but when the vac is on in another part of the house, ...

Ad

Electrolux Central Vac- One hose works well, one does not We have 2 hoses, upstairs and down. The downstairs one has minimal suction, the second one works well in the same outlet. I used a plumbing ...

Ad

Question about Central Vacuum

1 Answer

vacuum starts up on its own. The only way to stop it is to unplug it, why is this happening? The motor can only be switched on this way for 2 reasons. The circuit board inside the canister is bad or ...

Electrolux Centralux Central Vac system in my house. When I plug the vac hose in the central vac socket at first I heard the motor running very gently with NO suction then after a minute or so it went

...Electrolux Central Vacs. One is not working. Is there a reset button If this is a CENTRALUX metal bodied 1590 series vac vac there is a reset breaker on the side of the motor housing of the vac. ...

central vac I have no power for the accessory items If there's power to the power nozzle, there's power going to the powered accessories, as well. The problem must be due to a defective/broken "item".

Question about Centralux Vacuum

1 Answer

...electrolux central vac..can i use a hose and accessories from a model 15448 model electrolux central vac to compliment my central vac unit If the hose fits into the inlets, then there should be no ...

Question about EF1525 Central System Vacuum

1 Answer

central vac system, can you tell me the better of the easy flo or nutone brand. I want the one with the least problems. It appears to me that the easy flo has fewer problems, thank you between the two

...central vac unit does not turn off even when hose is disconnected. I have to unplug the motor unit in the garage to shut it off. What do you think the problem is? It is a 7 year old Electrolux ...

Question about Central Vacuum

1 Answer

...vacuum and using long-nosed pliers. Open the pliers and slip a point into each terminal. The motor should come on if it's still good. If it does run, the problem is with the relay board. Although you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...