Questions & Answers for: electrolux oxygen wand

...Oxygen 3 have a reset button? The cord re-wind is always wanting to rewind....a little annoying...The activation lever is stuck "on". Thank you. bjswdgirl in Portland, Oregon There is a reset on the ...

Electrolux oxygen series vacs Is there any place to get parts for these vacs online? I have a broken powerhead that I need a motor, and the whole powerhead to wand locking unit. I would also need a ...

electrolux oxygen vacuum the power wand seems to have a short, the light flickers and the power comes and goes. the suction is fine when I remove the power wand. WARNING WARNING Danger danger Will ...

...Electrolux Oxygen vacuum cleaner powerhead will not stay attached to the wand. i found this part online- search for part # via an exploded parts diagram of your specific unit (via google) i ordered 5 ...

wand will not come on electrical switch will not activte on floor vacuum wand just replace the switch.

...electrolux O3 carpet power head keeps shorting If your unit is like ours, there is a electrical short in the wand to Hose connection.. dont use it.. ours unit shorted out and sparks were everywhere.. ...

...connected You need to change the wand relaease assembly which has the metal locking pin to lock the wand http://evacuumstore.com/p-841-electrolux-oxygen-wand-release-assembly.aspx Bob ...

...wand sections and test the female electrical connections on the end of the hose handle. If you're not getting power here, this indicates that your hose has gone bad and needs to be replaced. We do ...

wand has now gone faulty again 4 months after replacing it and consequently Electrolux only warranty spares for 3 months which I think is poor! Its a great machine but a little too delicate even if it

the power nozzle on my oxy won't click into the wand. Do I need a new wand or a new poer nozzle? you need either a new wand clip or wand. Also, check the cord in the wand.