Questions & Answers for: electrical cord plug hot

...cord has electrical shortage I have a "Hot Tools" Professional Ion hair dryer whose electrical cord had a short. Can I repair the cord? Beth IF you take off about a inch of wire from the plug and ...

...lethal electrical condition). If your device requires a 3 prong connection, a 4 prong cord can be used by not connecting the neutral (white wire). If you have any questions, let me know. ...

...plug in cord burned from the base of the plug where the metal prongs meet the base of the plug. I replaced the plug in cord and now m dryer works, but it is not getting hot. It is also no moving ...

Electrical current passes through the electric cord and plug - it will get warm, that's normal. If the problem is worse where you smell an electrical burning smell, only an authorized dealer can fit a

...frying pan by Innova that we love but we have noticed that the cord gets hot near where it plugs into the wall outlet. Is the cord safe to use? no replace the cord, it is starting to brake

...cord gets hot because of the load on the unit... thses heaters pull alot of electric and the electricity going through the cord makes heat... make sure that you have it plugged directly into the ...

...cord straight into an electrical outlet that other electrical devices have been using. Bypass any surge devices or power strips. Unplug the power adapter from printer (rectangular black box inserted ...

...cord need to be replaced? Look carefully at the plug's connectors to see if thewre is any scorching or otherwise burnt metal...electrical connectors tend to get hot due to the plug being loose(this ...

...electrical cord has three wires neutral wire white wire black wires hot wire and bare wire for ground. if you cut either neutral wire or hot black wire in the electrical cord no power can flow to ...

...plug. The cord was destroyed and I noticed that the ground pin on the outlet end had broken off. there is approximately one OME of resistance per foot of power cord. the power cord must be sized ...