Questions & Answers for: electric oven door lock repair

...Electric oven model # GLEB27S7C My frigidaire electric oven's door will not unlock. We were trying to set the self clean mode, it beeped door and then it was supposed to beep lock but lock never ...

...oven on her electric range. The safety option locks the door to avoid accidental opening while the extreme temeratures clean the oven. According to the manual the lock should release when things cool ...

oven door locks and un locks code F90 the oven door lock will continue to lock and unlock while blinking door locked on control panel. If you hold the cancel button it will unlock and give error code ...

...oven door to clean. Need instructions to Locked oven door to clean. Need instructions to start the cleaning process on the oven correctly and how to unlock my oven door so I can start over. Have ...

...Electric oven indicates that the oven's electronic control system has detected a problem with the automatic door lock. The automatic door lock mechanism prevents the oven door from being opened when ...

...electric oven You will need to replace the switches on the door lock motor, if they are the type that are rivetted onto the motor then you have to replace the whole lock mechanism. For pricing info, ...

door to oven does not close completely - how do I access the door hinge to check or replace it? Open oven door. Flip metal holder down at hinge to lock hinge. Lift door with hinge attached up slightly

...oven. error code: c75 comm error. door engaged show on screen, cam sw, lock sw and door sw are open, but can't open the door. You controller is bad. C75 is "Redundant strobes on logic board are not ...

...oven door. Is this a common problem with this model GE oven? Is there something simple that I can repair myself, or should I call a repair center? Hi jrsinister, Error F9 has something to do with the ...

...oven is unplugged from the electric outlet. You will need to pull the oven away from the wall. Then, disconnect the door lock assembly wires from the micro-switch (make sure you note where the wires ...